Stitching. basically, stitch and glue boats are constructed by gluing panels of plywood together using epoxy resin and fiberglass. the stitching is used to hold the panels in place while the glue is applied and allowed to cure.. Boat building plywood power 1.2 okoume stitch and glue boat homemade the plans are bought from http://www.selway-fisher.com/mcup16.htm#1 it took me 3 year to.... The stitch and glue boatbuilding method is an easy way for a beginner to make a plywood boat. in a nutshell stitch and glue boatbuilding has 4 major steps. plywood parts of the boat are measured and cut according to plans. small holes are made around the edges of the pieces..
The stitch and glue canoe building method is an easy and affordable way for a beginning canoeist to make his or her own boat. basically, the technique consists of gluing panels of plywood together using epoxy and fiberglass. the stitching holds the panels in place while the epoxy is applied and allowed to cure.. This is the complete chesapeake light craft kayak building video, filmed in 2001. john harris walks you through every step in the construction of a chesapeake 16 kayak. straightforward to build. I did not apply fiberglass/epoxy to the 2 inches around the outside edge. this is where the biaxial tape will be applied to stem, chines and transom joints during the future "glue" phase of the stitch and glue boat building. i sand only the areas where there will be future epoxy such as the stem, chines and riblet locations..
0 komentar:
Posting Komentar